Automatic Folder Gluer with Stitching Machine

Semi-automatic Gluer Lamination

The whole machine adopts a PLC control system, which is more precise and stable in paper feeding compared to other delay devices or intermediate relay controls, and greatly improves speed. Circuit faults can automatically display alarms
Adopting well-known brand servo motors, the signal conversion control of brakes, clutches, and low light eyes has been eliminated; Realized independent operation of PLC and servo single control, with fast speed, high accuracy, and easy operation;
The bottom paper adopts suction automatic paper feeding, which can automatically track and continuously output paper according to the speed and continuity of the surface paper.
The positioning method adopts advanced elastic front gauge positioning, with high positioning accuracy and the base paper never leading ahead; When the top paper fits the bottom paper, it is easy to align or adjust the top paper in advance;
The fully automatic glue replenishment system can automatically replenish the lost glue amount during the bonding process, and cooperate with the recycling of glue substances to avoid glue loss and waste;
Scientific design of measuring roller line speed to avoid glue splashing during high-speed operation;
The pressure of the compression roller is adjusted unilaterally with screw nuts, which is convenient and fast;
The joystick controls the lifting and lowering of the washing roller, making it convenient to clean the lower roller of the upper glue part thoroughly and thoroughly.

Paper feeding department: suction feeding can better adapt to curved cardboard; High end electromagnetic clutch allows the paper feeding section to be independently controlled for easy and reliable operation; A simple and reliable electric adhesive controllable device with easy cleaning; Stainless steel coated wheels, evenly coated with glue, saving glue volume.
Glue folding part: Imported wear-resistant rubber belt conveyor cardboard for longer use; Cardboard correction device and wire pressing device, with adjustable wire pressing wheel, suitable for cardboard thickness of 2-8mm; The secondary indentation mechanism can perform secondary indentation on cardboard with poor indentation quality.
Counting and Stacking Output Unit: The counting and stacking principle is simple and reliable; Adopting digital control, reliable operation, non-stop input of data, automatic counting, accurate output; Equipped with correction function and adjustable deviation; The counting is pushed out using pneumatic method, which is accurate and fast in action.